Garage door springs are one of the most important parts of your home; without them, your garage would be little more than a useless storage space. Unfortunately, sometimes these springs break and need to be replaced. This blog post will walk you through the process of telling you when a garage door spring broke and getting springs installation & replacement services in Burnsville MN. We’ll also provide some tips on how to tell if the springs broke and what you should do if that’s the case.

Bent Door, Get Springs Installation & Replacement Services

If you have a bent door, it’s time to call a professional. Springs installation & replacement services in Burnsville MN can help determine if your garage door springs are broken and need to be replaced. First, check the tension on your springs by holding down the open button and pulling up the cable. If the cable moves more than an inch or two, your springs will broke down. You can also try loosening all the screws on the bottom of the door and applying pressure with your hand while pulling up the cable. You’ll need to replace your springs if these measures don’t work.

Broken Cables

If you springs installation & replacement services, there is a good chance that one or more of the cables are broken. When this happens, the motor can’t get enough momentum to open or close the door and may become stuck in the “down” position. If the problem is getting untreated, it can eventually lead to serious structural damage to your garage.

The Garage Door Closes Too Quickly.

If your garage door springs broke, it can cause the door to close too quickly. This can be a safety hazard if you’re not home when the door closes. You may also notice that the door will only stay open for a short time before closing again. If this happens regularly, you’ll need to call springs installation & replacement services to replace it.

Garage Door Jerks

If you’re experiencing strange garage door jerks, it may be time for affordable springs replacement services in Burnsville MN. Springs are a common failure point for garage doors and can cause the door to spring open unexpectedly.

  1. Check your door’s movement. If the door doesn’t move smoothly along its track, there’s a good chance that your springs are broken.

    2. Listen for loud noises when the door opens and closes. If you hear loud screeching or grinding sounds, one or more of your springs are missing or damaged.

    3. Look at the position of the springs on either side of the track. They probably break down if they’re twisted or bent out of shape.

    4. Replace your springs if any of these tests indicate that damage or worn out.

Loud Noise

When it comes to garage door springs, there are a few things you can do to determine if they are broken. First, see if the garage door opens and closes normally. If it does not, your springs may be damaged. Second, try pressing down on each spring at the bottom of the door. If one springs back more than the others, it is probably broken. Finally, check for rust or corrosion on the ends of the springs. If either of these conditions is present, your springs break and need a replacement.

Skewed Garage Door

If your garage door springs break heavily, it’s time to get springs installation & replacement services. Garage door springs are heavy and can cause the door to sag and wobble while in use. A broken or weak garage door spring can also lead to other problems, such as a trip or fall. If you notice these symptoms, it’s time for a new garage door spring installation.

Visible Gap

If you notice a visible gap in your garage door, you may need to replace it. A broken spring can leave a gaping hole in the door, making it difficult to open or close. You can get springs installation & replacement services in Burnsville MN as soon as possible by scheduling an appointment with a professional installer.

If you’re unsure if your garage door needs repairing, contact a professional installer to inspect it. If you have a visible gap between your garage door and the ground, there’s a good chance that your springs are broken. Springs hold the door up, and if they’re too weak, it will sag and eventually fall. If you’re unsure whether you have broken springs, you can take some simple steps to find out. Finally, try pulling on the door with a rope or cable to see if it starts to move easily. If any of these tests show that your springs broke down, you’ll need to replace as soon as possible to prevent the garage from becoming unusable.

Heavy Garage Door

When your garage door springs become compromised, it can result in several problems. The most common issue is that the door will not close properly, which can lead to safety hazards.

-If the garage door won’t stay open when you try to close it with your hand, the springs are likely broken. 
-If the door makes a “clicking” noise when you open and close it, there may be damage to one or more of the springs.


If you are experiencing difficulty opening or closing your garage door, you may need affordable springs replacement services in Burnsville MN. Springs can be replaced relatively easily and without special tools, but it is important only to hire a professional who is experienced in this type of work. If you do not have the skills or time to replace the springs, ask a friend or family member to help you.

Finally, if you are experiencing any other issues with your garage door, please don’t hesitate to call Garage Door Viking for help. We are here to help you get everything working properly and ensure that your garage is a safe and convenient place to store your belongings.

Leave a Reply

Your email address will not be published. Required fields are marked *

five + 4 =